Standart Passive LCD

Custom Passive LCD

Active LCD / TFT

TFT Monitor

Single Board Computer

OLED Display

Miscellaneous

Silicone Rubbers (zebra)

Heat Seal

Membrane Keyboard

Backlight

LED Backlight Electroluminescent lamp

french version

GSR Technology
ZA Ploumarch
29, rue Jean Ploumarch
95100 Argentueil - France

Tel. : +33 (0) 1 69 10 00 63
Fax : +33 (0) 1 69 09 31 85
sales@gsr-technology.com

Lyon Agency
Tel. / Fax :
0033 (0) 4 78 19 44 08
oboulin-gsr@wanadoo.fr

Long life expentancy  Simple brightness adjustment  This is the most popular choice of backlight  Four LED layout configurations available to suit different display  Other LED layout configurations possible as custom design

STANDARD LAMP STYLE

Style LED-01 The LED chips are mounted on the left and right edge of the illumination unit. Style LED-02 The LED chips are mounted on the upper edge of the illumination unit. Style LED-03 The LED chips are mounted on the upper and lower edge of the illumination unit. Style LED-04 The LED chips are distributed over the whole lit area, bonded in a pattern which gives the most uniform illumination. Power connection is made by 2 solder holes, marked "A" for +4.2V and "K" for ground

WHAT IS A SILICONE RUBBER INTERCONNECTOR ?     per segment Unit Condition MIN TYP MAX Forward Voltage VF 3.8 4.2 4.5 V IF=10mA Reverse current IR - - 100 µA VR=4VA Peak wavelength Green P - 565 - nm IF=10mA Yellow - 585 - Red - 635 -

FEATURES AND ADVANTAGES   Symbol Maximum value Forward current IF 15 mA Pulse current, 10% duty, 1mS pulse width IFP 50 mA Reverse voltage VR 4 V Power dissipation P 45 mW Operating temperature TOP -30 to +80°C Storage temperature TSTO -40 to +85°C

  for further informations, please click here.